AVIATOR

Do you dream of flying? Do you like sensations? Once again, Ugears is fulfilling a dream by reaching the skies with its first–ever flight simulator represented by two flying machines in one kit: the Aviator model.

The model has three modules: the airplane, the helicopter and the flight control tower. Choose your device, place it on the tower bar and you‘ll be ready to fly. As a beginner pilot, you may want to start with the helicopter which is not as difficult to control as the airplane.

Easier to handle but no less exciting, your helicopter features a cockpit with doors that open and close, as well as main rotors and a three–bladed tail. The aircraft has a higher speed and requires some skill to operate. This module is based on a biplane and has a 5–piston engine. To learn how to fly this stray bird, it may take you several hours of flight, but that‘s of course part of the fun! Also, you would have already learned the basics if you started with the helicopter.

However, your cockpit is the control tower, a sophisticated device with a high–performance motor that powers the rotation of the swashplate with the helm, with an aircraft on one side and a counterweight on the other. The control tower works with two control bars: – the control column regulates the roll and pitch of the flying machine; – and the engine controller to set the speed (revolutions per minute) and dose the speed of the aircraft. Precise adjustment ensures the proper operation of the swashplate. When the three units are assembled and you‘re ready to dive into the sky, it‘s time to buckle up. Make sure you don‘t overstretch the rubber bands in the motor – the maximum winding should not exceed 25 half turns. Grasp the handle while releasing the motor controller lock to launch your model. Hold on to the handle, and hair in the wind: fly! Because the sky is your only limit with the new Aviator model from Ugears–Models.

The kit is made of high–quality, sustainably sourced wood and has everything you could need for assembly. The quality of the parts is excellent: a laser method is used to cut the pieces from a plywood board that provides precise cuts. The pieces must be removed from the boards and assembled to create the complete model. Like all other Ugears models, the Aviator model comes with step–by–step, full–color, really easy–to–follow instructions (in 11 languages: Ukrainian, English, German, French, Polish, Spanish, Russian, Turkish, Italian, Chinese, and Korean) and requires no glue or special tools to be fully assembled.